If you try to eject a CD or DVD and get the message There was an error ejecting a DVD-RW drive, this message provides some suggestions that may help you solve the problem. This is mainly due to a hardware issue, but there could be other reasons as well.
The drive letter is mentioned in the error message and can be H, E, D, etc. Before you start troubleshooting, you should install the latest driver version on the CD/DVD.
What is the cause of the error message "Error removing DVD-RW drive" in Windows 10?
To clarify the path to the actual solution, we will look at two possible cases and evaluate the solution required in each case.
The CD/DVD drive has a software problem: If the DVD/CD drive has a software problem, you should be able to fix it.
The CD/DVD drive has a hardware problem: Another cause of this problem is a hardware problem. Check to see if the CD/DVD drive LED lights up when you try to remove it. If this light is not flashing, the drive has no power. If the light flashes, the player has power, but another hardware issue is blocking ejection.
How to fix "Failed to eject DVD-RW drive" error in Windows 10?
Stop the stagnant task in Task Manager
If your computer refuses (or doesn't) eject a CD or DVD—especially after you've asked it to—there's a chance that playback operations are currently based on a specific task. The application for this task is probably still in place to drive control.
Windows is programmed to consider internal communication between running programs and the player before responding to instructions.
So since you want the disk to be ejected, you need to stop the stagnation task. You must use the End Task function to end the paused task procedure. This way Windows will not allow the task to run at the same time as the read operation. Follow these instructions:
- First of all, you need to launch the task manager application. You can open this program by right-clicking on the taskbar (at the bottom of the screen) to bring up the available context menu and selecting Task Manager.
You can also use this keyboard shortcut to quickly open the Task Manager application: Ctrl+Shift+Escape.
- Click the Details button to display the extended Task Manager window �\x93 if this step applies.
- Assuming you are now in the standard Task Manager window, you need to open the Windows Explorer panel.
You should now be able to see the CD or DVD drive name and drive letter. For example it could be a DVD RW DRIVE (H:) AUDIO CD or something similar.
- Click on the relevant drive component to highlight it, and then click the Finished Task button (bottom of the window) that just appeared.
If you don't see the Hard Disk component, you need to find the active application that manages your hard disk, click on it to highlight it, and then click on the Done Task button (at the bottom of the window).
- Now close the task manager. Now do what you need to do to eject the CD/DVD.
Close the third-party burning application
If the CD/DVD does not eject after you burn the CD/DVD into your computer's drive, you need to close the application you are using. If the application keeps crashing even after you click Close, you need to force close the process in Task Manager. If you think your DVD recorder is still active (it's working on something important), you should wait a few minutes before trying the procedure described here.
Completing the third-party request procedure will more or less cause the burner to stop working on your device. When your computer's drive goes into sleep mode, it can be ejected with ease. Since the previous procedure required you to work in the Task Manager application, the steps here will look familiar. Follow these steps to complete the task:
- First you need to open the Task Manager application.
We have omitted the instructions on how to open this application since we detailed the steps in the previous procedure. You can scroll down the page to view them.
- Assuming you are now in the desired Task ManagProcess window, you should browse the applications listed under the Process tab.
- Locate the problematic application (the one that refuses to close), click on it to highlight or select it, and then click the End Task button (at the bottom of the screen) that appeared recently.
li>
Windows will now take action to end the program.
- You should now close the Task Manager application.
- Use the appropriate extraction function again to see what happens.
If the computer refuses to eject the drive again �\x93 if you get an error message when ejecting the DVD-RW drive, you should close all programs currently open on the system, restart the computer and check if everything works now.
Use the special eject button to complete the task
The recommended procedure for ejecting a diskette/floppy disk requires the user to perform the task through software operations (usually performed on the screen). You've probably tried to eject the DVD player using the "Eject" option in the taskbar menu, but so far you haven't done anything. So, it's time to consider other methods to do the same.
If Windows has trouble ejecting the DVD drive - after giving the computer special (software) instructions to do the same, you need to use the (physical) eject button to tell it to do the same. Many DVD burners are equipped with a special eject button. We're assuming you have one too. You need to find and press this eject button on the disc cover (the physical component on the side of your laptop).
Resetting a DVD/CD
Here we want you to run a special command in the high Command Prompt window to reset your computer's DVD/CD drive controls. Many users have confirmed that they were able to eject their drives after forcing the computer to reset Disk Management (by performing this task here.) Fortunately, the suggested process is relatively simple and easy to implement.
Here are the instructions you need to follow to restart your computer's DVD/CD drive:
- First, right-click the Windows icon in the lower-left corner of your device's screen to view the applications and options included in the Power Users menu.
- From the list that appears, select Command Prompt (Admin).
The Admin: Command Prompt window appears.
- You should now run the following command (by typing it first and then pressing Enter on your keyboard to force Windows to run):
reg.exe adds "HKLMSystemCurrentControlSetServicesatapiController0" /f /v EnumDevice1 /t REG_DWORD /d 0x000001
- Now you should close the Command Prompt window and then restart the computer.
- After the reboot, you should run the disk eject process any way you can to see what happens this time.
Installation of the CD/DVD driver
If your CD/DVD drive does not come out �\x93 even after trying our recommendations above �\x93 you should consider the possibility that the problem is caused by mismatched or divergent drivers. Yes, if you're still struggling with the problem defined by the "Error occurred removing DVD-RW drive" message, then the driver for your CD/DVD drive is probably defective, corrupted, or just in a very bad condition.
We want Windows to reinstall the CD/DVD driver on your computer. Many users have been able to solve their driver problems simply by reinstalling faulty or problematic drivers. You too should do the same to get the desired results. It seems that the changes (uninstall and install procedures) introduced by reinstalling the driver are enough to make changes that fix a whole bunch of issues in the driver code.
In any case, here are the instructions to reinstall the driver for your CD/DVD drive:
- First, you need to run the Run application using this key combination: the Windows logo key+the letter R.
- After a small run window appears, you need to fill in the text field with this code:
devmgmt.msc.
- In the Run window, click OK (or press Enter on your keyboard).
Windows will now run the code. The Device Manager window opens.
- Browse the category list, locate the DVD/CD-ROM drive category and click the expand icon next to that category.
You will now see the contents of the DVD/CD-ROM drive category.
- Locate your DVD/CD-ROM drive, right-click to highlight it, right-click the selected device to display the available context menu, and then select Erase Device.
Windows should now prompt you to uninstall the selected device driver.
- In the small window or dialog box, click Uninstall to continue.
Your system will now take action to remove the driver from the DVD/CD drive.
- Once the DVD/CD driver removal is complete, you should close all open windows and then restart your PC.
If all goes well �\x93 that is, if your system reboots, shuts down and realizes that an important driver is missing �\x93 the computer will eventually reinstall the appropriate driver. Finally, you should try to remove the CD/DVD drive you were having trouble with to make sure all goes well this time.
frequently asked Questions
How do I fix the error I get when ejecting DVD-RW drive?
If the computer refuses to eject the drive again-if you get the message "DVD-RW drive is Ejecting Error"-then you need to close all programs currently open on your system, restart the computer and check again now everything works.
How do you open a DVD drive?
- paperclip. Straighten one leg of the paperclip.
- Small hole. Locate a small hole in your CD drive, this is usually near the button.
- Insert the paperclip into the hole. Insert the paperclip into the hole and gently push until the door opens.
- Complete. The player is open!
Why is my DVD player ejecting?
The first and most likely reason is that if the DVDs are blank, you have a broken player. Several viruses cause devices to do strange things that also affect CD and DVD players. However, these cases are rare these days, and when your computer is "clean", open the drawer and see if there is dust on the laser lens.
How do I manually remove a DVD-ROM?
- Restart your computer and press the F2 key during the restart.
- In the SystemBIOS, press the eject button on the CD/DVD/Blu-ray drive.
- When the drive is successfully ejected in the system BIOS, restart your computer and boot into your operating system.
แสดงความคิดเห็น