Fix Windows activation error 0xc004f063

 If you do not have permission to activate your version of Windows and you encounter activation error 0xc004f063, you can read this message on Techquack. It will show you some workable methods to solve this problem. We hope you find this post useful.

You may not be able to activate your Windows build. The error code that occurs when this operation fails is 0xc004f063 and the error code is always presented by the "Software Licensing Service reported that the computer BIOS lacks the required license" error message.

This problem is most common in Windows 7, but also in Windows 8.1 and Windows 10. What is the cause of activation error 0xc004f063? Here are several possible causes: license limitation, BIOS mismatch, corrupted system files, and license key mismatch.

If you are having troubles with Windows 0xc004f063 activation error, please follow the instructions below to fix the problem.

Why Does Windows Activation Error 0xc004f063 Occur?

The system error 0xc004f063 is very annoying. It can appear in an operating system activated with a legitimate and approved license key. There are several reasons for this problem:

Third- party software conflicts: Although rare, some third-party programs such as Alcohol 120% and Daemon Tools can conflict with the operating system and compromise the license key.

Windows issues: Installed Windows updates can contain activation errors that prevent the operating system from getting a license. This usually results in the error message "The BIOS license required for Windows BIOS-100xc004f063 is missing". License restrictions related to Windows errors can be fixed easily by running Windows Activation Error Automatic Recovery.

Corrupted system files: Corrupted system files can prevent the operating system from checking for activation. If this is the case, you can fix it with the built-in tools: Windows System File Checker (SFC) and Deployment Image Servicing and Management (DISM).

BIOS Mismatch: If you reset an already activated PC and try to activate a different version of Windows (like Home, Pro or Enterprise) while the old key is still stored in the BIOS, the error 0xc004f063 will be removed. The SLMGR utility can help solve this problem.

Server problem: Your license key may not be recognized by MS servers. Contact Microsoft Support for help with this issue.

How to fix Windows 10 activation error 0xc004f063

Run the activation troubleshooter (Windows 10 only).

Before proceeding with other repair strategies, check if your version of Windows can solve the problem automatically. Note that Windows 10 includes several different automatic repair strategies that the system can use when it detects a known scenario.

If the problem is caused by a license restriction, the Windows Activation Diagnostic tool should be able to fix the problem automatically. This integrated tool contains a selection of repair strategies that will fix the problem automatically if your activation problem is already covered by a repair strategy.

IMPORTANT: This method is applicable only when the problem occurs in Windows 10. If the 0xc004f063 error occurs in an older version of Windows, continue with the method described below.

Several affected users confirmed that they were able to fix activation error 0xc004f063 by running the activation program and restarting the computer. The next attempt to activate the license key was successful.

Here is a quick guide on how to use Activation Error Recovery:

1. Press Windows+R to open the Run dialog box. Then type "ms-settings: activation" and press Enter to open the Activation tab in the Settings screen.
2. On the Activation tab, look in the right pane for the Activation section (at the bottom of the screen). From there, click the Troubleshoot button.
3. Wait for the utility to start, then wait patiently as it scans your system for inconsistencies. If problems are found that can be fixed, a repair strategy will be presented to you. To make it work, click Apply this fix and wait for the process to complete.
4. After applying the fix, restart your computer and wait for the next boot sequence. After the next boot sequence, proceed to the next method described below.

Activate Windows with SLMGR

If you see error 0xc004f063 when trying to activate your PRO key (right after sending it), the problem is probably because your BIOS is still using the Windows security key. This is quite common when a user previously brought in a pre-activated computer and then reset it.

If this scenario applies, your operating system will attempt to activate the operating system using the key stored in the BIOS, regardless of which activation key you choose to activate. If you find yourself in this situation, you can overwrite the wrong activation key with a series of commands that you type in the advanced command line. That's how it's done:

1. Press Windows+R to open the Run dialog. In the Run window, type "cmd" in the text box and press Ctrl+Shift+Enter to open the Run dialog box. When prompted for UAC (User Account Control), click Yes to grant administrative privileges.
2. Once you are in the elevated command line, type the following commands (press Enter after each command) to change the license key you are using to the correct one
3. slmgr/ipk
   slmgr/ato
4. Note: Remember that *windows-key* is reserved space only. To complete this process, you must replace it with your license key.
5. When the process is completed successfully, restart your computer and see if the change takes effect the next time you start your computer.

If your version of Windows is still not activated despite having a valid license key, continue to the next method described below.

Perform SFC and DISM scans

It turns out that one of the most common reasons that can lead to Windows activation error 0xc004f063 is some kind of corruption of system files. In most cases, this problem occurs because a critical activation process is actually affected, so your operating system cannot validate the process.

If this scenario applies to you, the most effective way to solve the problem is to run a series of built-in utilities that can fix local errors and corrupt operating system files. Note that DISM (Deployment Image Servicing and Management) and SFC (System File Checker) can do this, but in different ways.

DISM relies heavily on WU (Windows Update) to replace corrupted items with clean copies, while SFC relies on a local archive to process corrupted system files. SFC is better at fixing logical errors while DISM is better at finding corrupted sub-processes.

To maximize your chances of solving this problem, we recommend you to use both utilities to maximize your chances of repairing corrupted instances that can be the source of error 0xc004f063. Here are some step-by-step guides on what to do:

1. Press Windows+R keys to open the Run dialog. Then type "cmd" in the text box and press Ctrl+Shift+Enter to open Command Prompt with administrative privileges.
2. Note: If you see the UAC (User Account Control) prompt, click Yes to grant administrator access.
3. In the expanded CMD window, type the following command one by one and press Enter to run the DISM command:
4. Dism.exe/online/cleanup-image/scanhealth
   Dism.exe/online/cleanup-image/scanhealth recovery
5. Note: Before starting this procedure, make sure your internet connection is stable. This is important because DISM uses WU to download clean files that are used to replace corrupted items. So that you know what the commands do: the first (health scan) scans the system for inconsistencies and the second (health recovery) starts the recovery process.
6. Wait for the process to complete, then restart your computer and wait patiently for the next boot to complete. Then repeat step 1 to open another high PDC prompt. However, this time, type the following command and press Enter to start the SFC scan:
7. sfc / scanned.
8. Note: Under no circumstances should this process be interrupted before it is complete (even if it freezes for a few minutes). If you do this, your system will be compromised and more logic errors may appear.
9. After the second system file scan finishes, restart your computer and check if the problem is resolved the next time you start the system.

If you have followed the instructions above and you still get the 0xc004f063 error, move on to the next method.

Contacting Microsoft Support

If you were unable to activate your version of Windows using any of the methods above and you still get the 0xc004f063 error, your best bet is to contact Microsoft support and ask them to activate your operating system.

There are several ways to do this, but the most convenient way is to contact a Microsoft representative on the toll-free number for your region.

Keep in mind that depending on the region and the number of support agents active there, you may have to wait a few hours before contacting a live agent.

After a successful conversation with the person, you will be asked some security questions to confirm that you have the license key you want to activate. If all goes well, your Windows build will be activated remotely.

frequently asked Questions

How to Fix Error 0xc004f063?

1. Click Start and type "cmd" (without the quotes) in the search box.
2. Right-click cmd in the list of programs and select "Run as administrator".
3. In the command shell, type the following command and press Enter after each command.
4. Activate your copy again and see if it works.

How do I fix a Windows activation error?

To begin troubleshooting activation issues, select Start->Settings->Update & Security->Activation and then Troubleshoot. For more troubleshooting information, see Using the Activation Troubleshooter.

How to fix error 0x803f7001?

To get to this exception path, select Start-> Settings-> Update and Security-> Activation and select Troubleshoot. If the troubleshooter doesn't fix the problem, you'll see a reactivation link after you change your hardware. Select it to follow this path. For more information, see Activate Windows 10 after a hardware change.

How to fix error 0X8007007b?

1. Activate Windows over the phone.
2. Activate Windows from the command line.
3. Use the Slui 3 command.
4. Change the product key to multiple activation keys (MAK).
5. Run a system file check.
6. Advanced solution from Microsoft.