The red cross on your WiFi or other network adapter indicates that there are some problems with the network adapter and your computer cannot connect to the internet for some reasons. The main culprit behind this problem is the absence of a proper network adapter driver on your system. Do not worry. You can easily fix this problem by following these simple solutions.
How to Fix Red X on Network Adapters in Windows 10, 11
First, we recommend trying some pre-checks and quick workarounds to fix the issue with less effort.
Fix 1 : Disconnect and reconnect the network adapter
1. Disconnect the network adapter from the port on your computer.
2. Then wait a minute.
3. After one minute, reconnect the network adapter to the port.
Now try to reconnect to the internet via the network adapter.
Fix 2-Disable and enable network card
The best solution to this problem is to disable and re-enable the network card on the computer.
1. First, right-click on the Windows icon in the taskbar and then tap on " Run ".
2. Then type " ncpa.cpl " and click " OK ".
3. Here you will find all network adapters of your system.
4. Then right-click on the network adapter showing the red X and click " Disable ".
This disables the network adapter.
5. Now right click on the disabled network adapter and tap " Enable " to enable the network adapter.
Then close the Network Connections window. You will no longer notice the red cross over the network adapter.
Fix 3 : Change internal WiFi settings in BIOS
You can enable internal WiFi settings in BIOS.
1. First restart your computer .
2. As your computer boots up, hold down the " Del " key on your keyboard to access the BIOS settings.
The actual key to open Startup Settings on your computer may be different. Look for the enter BIOS setup key when the boot screen appears to enter the BIOS setup on your system.
3. Once in the "BIOS", go to the " Advanced " tab.
4. Then use the arrow keys to select the " Internal WLAN " settings and press Enter .
5. Now select " Enabled " and press Enter again .
12. Now press " F10 " on your keyboard.
13. Now select " Yes " to finally save the BIOS settings on your computer and exit.
Your computer will start normally. The red cross on the network adapter icon in the taskbar does not appear.
Your problem should be solved.
แสดงความคิดเห็น